logo
banner banner

News Details

Home > News >

Company news about New Product Launch: Volvo Truck NOx Sensor OE 22827991 for Euro 5 & Euro 6 SCR Systems

Events
Contact Us
Mrs. April
86-18100162701
Contact Now

New Product Launch: Volvo Truck NOx Sensor OE 22827991 for Euro 5 & Euro 6 SCR Systems

2026-11-17

New Product Launch: Volvo Truck NOx Sensor OE 22827991

We are pleased to announce the addition of a new product to our heavy-duty truck sensor line-up: the Volvo Truck NOx Sensor with OE number 22827991. This direct-fit nitrogen oxide sensor is engineered for Volvo FH, FM, FMX, FE and FL series trucks, as well as Renault Trucks models equipped with Euro 5 and Euro 6 SCR (Selective Catalytic Reduction) systems. It is now available for stock orders and fleet maintenance programs worldwide.

Why the NOx Sensor Matters More Than Ever

The NOx sensor is one of the most critical components in any modern diesel after-treatment system. It is the "eyes" of the SCR system: without accurate nitrogen oxide readings, the engine control module (ECM) cannot dose AdBlue (DEF) correctly, and the entire emissions strategy collapses. For fleets and workshops, a failed NOx sensor is never a minor fault — it triggers a chain of costly consequences.

  • Emissions compliance: Euro 5 and Euro 6 legislation sets strict limits on nitrogen oxide output. The NOx sensor provides the closed-loop feedback that keeps a truck legally compliant and road-legal at inspection.
  • Avoids engine derate and no-start conditions: When NOx values exceed thresholds or the sensor signal is implausible, the ECM reduces torque and, in severe cases, limits vehicle speed or restart capability — a direct hit to delivery schedules and revenue.
  • Prevents excessive AdBlue consumption: A drifting sensor causes over-dosing of DEF, raising operating costs and increasing the risk of ammonia slip and crystallisation in the SCR catalyst.
  • Protects the SCR catalyst and DPF: Correct dosing maximises conversion efficiency and prevents urea deposits, catalyst poisoning and downstream filter blockage.
  • Improves fuel economy and uptime: Accurate NOx feedback allows optimal combustion and dosing strategy, reducing unplanned workshop visits and diagnostic labour hours.

How the NOx Sensor Works

The sensor uses a multi-cell zirconia ceramic element with integrated heater circuits to measure nitrogen oxide concentration in the exhaust gas stream. Two sensors are typically used in a Euro 6 architecture — one upstream and one downstream of the SCR catalyst — so the ECM can compare the NOx reduction efficiency across the catalyst and adjust dosing in real time.

  1. Sampling: A portion of exhaust gas enters the measuring chambers of the ceramic sensing element.
  2. Electrochemical measurement: Oxygen is pumped out first, then NOx is decomposed electrically; the resulting pump current is proportional to the NOx concentration.
  3. Signal output: The sensor transmits a precise digital or analogue signal to the ECM via the wiring harness connector.
  4. Closed-loop control: The ECM calculates SCR efficiency and adjusts AdBlue injection quantity and timing accordingly.
  5. Self-diagnosis: The sensor monitors heater performance, signal plausibility and response time, and reports faults to the on-board diagnostic system before the driver experiences a derate event.

Product Specifications

Item Specification
OE Reference Number 22827991
Product Type Nitrogen Oxide (NOx) Sensor / Lambda Sensor Assembly
Application Volvo FH / FM / FMX / FE / FL, Renault Trucks — Euro 5 & Euro 6 SCR systems
Position Upstream (pre-SCR) or downstream (post-SCR) depending on chassis layout
Sensing Element Zirconia ceramic multi-cell with integrated heater
Operating Voltage 12V / 24V system compatible (per OE specification)
Connector OE-matched plug, pin-for-pin compatible
Housing Material Stainless steel body with high-temperature ceramic protection
Operating Temperature Designed for continuous high-temperature exhaust duty
Quality Standard 100% end-of-line functional and response-time tested
Warranty 12 months against manufacturing defects
Packing Individual anti-static bag with protective sleeve, neutral or branded carton

Fitment and Application

  • Volvo FH, FM and FMX tractors and rigids with Euro 5 / Euro 6 engines
  • Volvo FE and FL distribution trucks requiring NOx monitoring
  • Renault Trucks models sharing the same SCR architecture
  • Fleet maintenance, accident repair and workshop replacement programs

Buyers are advised to confirm the chassis number and engine variant before ordering, as multiple sensor variants exist across production years.

Quality Assurance and Testing

Every unit is built to OE-equivalent tolerances and undergoes heater resistance verification, response-time testing under simulated exhaust conditions, and full connector continuity inspection. This ensures plug-and-play installation with no coding required in most applications, and stable performance across cold-start and high-load duty cycles.

Ordering Information

Sample orders and mixed container loads are both supported. Please send your target quantity, model year range and destination port so that we can confirm availability, lead time and the most economical shipping option. Technical documentation and cross-reference lists are available on request.

banner
News Details
Home > News >

Company news about-New Product Launch: Volvo Truck NOx Sensor OE 22827991 for Euro 5 & Euro 6 SCR Systems

New Product Launch: Volvo Truck NOx Sensor OE 22827991 for Euro 5 & Euro 6 SCR Systems

2026-11-17

New Product Launch: Volvo Truck NOx Sensor OE 22827991

We are pleased to announce the addition of a new product to our heavy-duty truck sensor line-up: the Volvo Truck NOx Sensor with OE number 22827991. This direct-fit nitrogen oxide sensor is engineered for Volvo FH, FM, FMX, FE and FL series trucks, as well as Renault Trucks models equipped with Euro 5 and Euro 6 SCR (Selective Catalytic Reduction) systems. It is now available for stock orders and fleet maintenance programs worldwide.

Why the NOx Sensor Matters More Than Ever

The NOx sensor is one of the most critical components in any modern diesel after-treatment system. It is the "eyes" of the SCR system: without accurate nitrogen oxide readings, the engine control module (ECM) cannot dose AdBlue (DEF) correctly, and the entire emissions strategy collapses. For fleets and workshops, a failed NOx sensor is never a minor fault — it triggers a chain of costly consequences.

  • Emissions compliance: Euro 5 and Euro 6 legislation sets strict limits on nitrogen oxide output. The NOx sensor provides the closed-loop feedback that keeps a truck legally compliant and road-legal at inspection.
  • Avoids engine derate and no-start conditions: When NOx values exceed thresholds or the sensor signal is implausible, the ECM reduces torque and, in severe cases, limits vehicle speed or restart capability — a direct hit to delivery schedules and revenue.
  • Prevents excessive AdBlue consumption: A drifting sensor causes over-dosing of DEF, raising operating costs and increasing the risk of ammonia slip and crystallisation in the SCR catalyst.
  • Protects the SCR catalyst and DPF: Correct dosing maximises conversion efficiency and prevents urea deposits, catalyst poisoning and downstream filter blockage.
  • Improves fuel economy and uptime: Accurate NOx feedback allows optimal combustion and dosing strategy, reducing unplanned workshop visits and diagnostic labour hours.

How the NOx Sensor Works

The sensor uses a multi-cell zirconia ceramic element with integrated heater circuits to measure nitrogen oxide concentration in the exhaust gas stream. Two sensors are typically used in a Euro 6 architecture — one upstream and one downstream of the SCR catalyst — so the ECM can compare the NOx reduction efficiency across the catalyst and adjust dosing in real time.

  1. Sampling: A portion of exhaust gas enters the measuring chambers of the ceramic sensing element.
  2. Electrochemical measurement: Oxygen is pumped out first, then NOx is decomposed electrically; the resulting pump current is proportional to the NOx concentration.
  3. Signal output: The sensor transmits a precise digital or analogue signal to the ECM via the wiring harness connector.
  4. Closed-loop control: The ECM calculates SCR efficiency and adjusts AdBlue injection quantity and timing accordingly.
  5. Self-diagnosis: The sensor monitors heater performance, signal plausibility and response time, and reports faults to the on-board diagnostic system before the driver experiences a derate event.

Product Specifications

Item Specification
OE Reference Number 22827991
Product Type Nitrogen Oxide (NOx) Sensor / Lambda Sensor Assembly
Application Volvo FH / FM / FMX / FE / FL, Renault Trucks — Euro 5 & Euro 6 SCR systems
Position Upstream (pre-SCR) or downstream (post-SCR) depending on chassis layout
Sensing Element Zirconia ceramic multi-cell with integrated heater
Operating Voltage 12V / 24V system compatible (per OE specification)
Connector OE-matched plug, pin-for-pin compatible
Housing Material Stainless steel body with high-temperature ceramic protection
Operating Temperature Designed for continuous high-temperature exhaust duty
Quality Standard 100% end-of-line functional and response-time tested
Warranty 12 months against manufacturing defects
Packing Individual anti-static bag with protective sleeve, neutral or branded carton

Fitment and Application

  • Volvo FH, FM and FMX tractors and rigids with Euro 5 / Euro 6 engines
  • Volvo FE and FL distribution trucks requiring NOx monitoring
  • Renault Trucks models sharing the same SCR architecture
  • Fleet maintenance, accident repair and workshop replacement programs

Buyers are advised to confirm the chassis number and engine variant before ordering, as multiple sensor variants exist across production years.

Quality Assurance and Testing

Every unit is built to OE-equivalent tolerances and undergoes heater resistance verification, response-time testing under simulated exhaust conditions, and full connector continuity inspection. This ensures plug-and-play installation with no coding required in most applications, and stable performance across cold-start and high-load duty cycles.

Ordering Information

Sample orders and mixed container loads are both supported. Please send your target quantity, model year range and destination port so that we can confirm availability, lead time and the most economical shipping option. Technical documentation and cross-reference lists are available on request.