We are pleased to announce the addition of a new product to our heavy-duty truck sensor line-up: the Volvo Truck NOx Sensor with OE number 22827991. This direct-fit nitrogen oxide sensor is engineered for Volvo FH, FM, FMX, FE and FL series trucks, as well as Renault Trucks models equipped with Euro 5 and Euro 6 SCR (Selective Catalytic Reduction) systems. It is now available for stock orders and fleet maintenance programs worldwide.
The NOx sensor is one of the most critical components in any modern diesel after-treatment system. It is the "eyes" of the SCR system: without accurate nitrogen oxide readings, the engine control module (ECM) cannot dose AdBlue (DEF) correctly, and the entire emissions strategy collapses. For fleets and workshops, a failed NOx sensor is never a minor fault — it triggers a chain of costly consequences.
The sensor uses a multi-cell zirconia ceramic element with integrated heater circuits to measure nitrogen oxide concentration in the exhaust gas stream. Two sensors are typically used in a Euro 6 architecture — one upstream and one downstream of the SCR catalyst — so the ECM can compare the NOx reduction efficiency across the catalyst and adjust dosing in real time.
| Item | Specification |
|---|---|
| OE Reference Number | 22827991 |
| Product Type | Nitrogen Oxide (NOx) Sensor / Lambda Sensor Assembly |
| Application | Volvo FH / FM / FMX / FE / FL, Renault Trucks — Euro 5 & Euro 6 SCR systems |
| Position | Upstream (pre-SCR) or downstream (post-SCR) depending on chassis layout |
| Sensing Element | Zirconia ceramic multi-cell with integrated heater |
| Operating Voltage | 12V / 24V system compatible (per OE specification) |
| Connector | OE-matched plug, pin-for-pin compatible |
| Housing Material | Stainless steel body with high-temperature ceramic protection |
| Operating Temperature | Designed for continuous high-temperature exhaust duty |
| Quality Standard | 100% end-of-line functional and response-time tested |
| Warranty | 12 months against manufacturing defects |
| Packing | Individual anti-static bag with protective sleeve, neutral or branded carton |
Buyers are advised to confirm the chassis number and engine variant before ordering, as multiple sensor variants exist across production years.
Every unit is built to OE-equivalent tolerances and undergoes heater resistance verification, response-time testing under simulated exhaust conditions, and full connector continuity inspection. This ensures plug-and-play installation with no coding required in most applications, and stable performance across cold-start and high-load duty cycles.
Sample orders and mixed container loads are both supported. Please send your target quantity, model year range and destination port so that we can confirm availability, lead time and the most economical shipping option. Technical documentation and cross-reference lists are available on request.
We are pleased to announce the addition of a new product to our heavy-duty truck sensor line-up: the Volvo Truck NOx Sensor with OE number 22827991. This direct-fit nitrogen oxide sensor is engineered for Volvo FH, FM, FMX, FE and FL series trucks, as well as Renault Trucks models equipped with Euro 5 and Euro 6 SCR (Selective Catalytic Reduction) systems. It is now available for stock orders and fleet maintenance programs worldwide.
The NOx sensor is one of the most critical components in any modern diesel after-treatment system. It is the "eyes" of the SCR system: without accurate nitrogen oxide readings, the engine control module (ECM) cannot dose AdBlue (DEF) correctly, and the entire emissions strategy collapses. For fleets and workshops, a failed NOx sensor is never a minor fault — it triggers a chain of costly consequences.
The sensor uses a multi-cell zirconia ceramic element with integrated heater circuits to measure nitrogen oxide concentration in the exhaust gas stream. Two sensors are typically used in a Euro 6 architecture — one upstream and one downstream of the SCR catalyst — so the ECM can compare the NOx reduction efficiency across the catalyst and adjust dosing in real time.
| Item | Specification |
|---|---|
| OE Reference Number | 22827991 |
| Product Type | Nitrogen Oxide (NOx) Sensor / Lambda Sensor Assembly |
| Application | Volvo FH / FM / FMX / FE / FL, Renault Trucks — Euro 5 & Euro 6 SCR systems |
| Position | Upstream (pre-SCR) or downstream (post-SCR) depending on chassis layout |
| Sensing Element | Zirconia ceramic multi-cell with integrated heater |
| Operating Voltage | 12V / 24V system compatible (per OE specification) |
| Connector | OE-matched plug, pin-for-pin compatible |
| Housing Material | Stainless steel body with high-temperature ceramic protection |
| Operating Temperature | Designed for continuous high-temperature exhaust duty |
| Quality Standard | 100% end-of-line functional and response-time tested |
| Warranty | 12 months against manufacturing defects |
| Packing | Individual anti-static bag with protective sleeve, neutral or branded carton |
Buyers are advised to confirm the chassis number and engine variant before ordering, as multiple sensor variants exist across production years.
Every unit is built to OE-equivalent tolerances and undergoes heater resistance verification, response-time testing under simulated exhaust conditions, and full connector continuity inspection. This ensures plug-and-play installation with no coding required in most applications, and stable performance across cold-start and high-load duty cycles.
Sample orders and mixed container loads are both supported. Please send your target quantity, model year range and destination port so that we can confirm availability, lead time and the most economical shipping option. Technical documentation and cross-reference lists are available on request.