logo
banner banner

News Details

Home > News >

Company news about WEGO Adds DAF Urea Module OE 2115847 to Its SCR Range: Why the AdBlue Dosing Module Decides Euro 6 Uptime

Events
Contact Us
Mrs. April
86-18100162701
Contact Now

WEGO Adds DAF Urea Module OE 2115847 to Its SCR Range: Why the AdBlue Dosing Module Decides Euro 6 Uptime

2026-11-19

New at WEGO: DAF Urea Module, OE Reference 2115847

Ruian Wego Auto Parts Co., Ltd (WEGO) has added the DAF urea module with OE reference 2115847 to its SCR (Selective Catalytic Reduction) product range. The part is a complete AdBlue dosing module for DAF heavy-duty trucks, and it joins a urea programme that already covers AdBlue injectors, DEF pumps, urea nozzles and dosing modules for Mercedes-Benz, MAN, Renault, Cummins, Ford, Fiat and Toyota applications.

For distributors and workshops, this is not simply one more SKU. The urea module is the single component that decides whether a Euro 6 truck actually converts its NOx, or whether it drops into a derate and stops earning. Below is a practical explanation of why it matters and what it does.

Why the Urea Module Is Critical on a Euro 6 Truck

Modern diesel emission control is a chain: NOx sensors measure, the engine ECU calculates, and the urea module delivers exactly the right quantity of AdBlue into the exhaust stream ahead of the SCR catalyst. Break any link and the whole system fails. The urea module is usually the weakest link, because it is the only part of the chain that handles a liquid that freezes, crystallises and contaminates.

  • Emission compliance — a module that under-doses raises tailpipe NOx immediately. In Europe, that means failing periodic inspection and losing the vehicle's compliance status.
  • No derate, no downtime — when dosing is interrupted or pressure cannot be built, the ECU logs a fault and progressively limits torque. A truck in limp mode is a truck losing revenue every hour.
  • SCR catalyst protection — over-dosing is just as damaging as under-dosing. Excess ammonia slips through the catalyst, and incorrect spray patterns cause urea deposits that block the mixer and poison the substrate.
  • Total cost of ownership — correct dosing keeps AdBlue consumption at the designed level. Poorly functioning modules quietly increase fluid consumption by 10-20% across a fleet.

What the Urea Module Actually Does

A complete urea dosing module such as OE 2115847 is a pump, a control unit and a sensor cluster in one housing. Its functions can be grouped as follows:

FunctionWhat It DoesFailure Symptom If It Degrades
Fluid supply and pressure regulationDraws AdBlue from the tank and maintains stable dosing pressureLow pressure faults, no dosing, torque derate
Dosing and injection controlMeters the exact quantity of urea per engine operating pointHigh NOx, ammonia slip, urea crystallisation
Heating and thawingWarms the module so frozen DEF (below -11 °C) returns to liquidCold-start faults, winter no-start of the SCR system
Level, temperature and quality sensingReports DEF level, temperature and concentration to the ECUFalse "poor quality" warnings, wrong dosing corrections
Reversing and purgingEmpties the line after engine stop to prevent freezing damageFrozen lines, cracked housings, repeat module failure
Diagnostics and CAN communicationStores fault codes and exchanges data with the engine ECUSpurious MIL, undiagnosable faults, misdiagnosis

What Buyers Should Check Before Ordering

  • Match the OE number exactly — 2115847 must appear on the original unit or in the vehicle's parts documentation; DAF urea modules are not interchangeable across all build years.
  • Confirm the connector and mounting pattern — the same functional module can differ in plug type and bracket between production periods.
  • Check the DEF system as a whole — replacing a module on a system with a contaminated tank or a blocked injector will produce an early repeat failure and a warranty claim.
  • Verify fitment by VIN — our team can cross-check the OE reference against your chassis range before shipment.

Built to the Same Standard as the Rest of the WEGO Range

WEGO has manufactured and exported SCR system parts since 2011, with 80-90% of output shipped internationally and an engineering team carrying around 20 years of SCR experience. The company's quality policy — "Pursue zero defects" — is applied through incoming component verification, in-process checks and final functional testing rather than a single end-of-line inspection. The DAF urea module OE 2115847 is supplied and tested under the same process.

Ordering the DAF Urea Module OE 2115847

Distributors, fleet workshops and private-label buyers can now request quotations for OE 2115847. The part can be consolidated with NOx sensors, PM sensors, DEF sensors, AdBlue injectors and VGT actuators in a single shipment to reduce freight cost per unit. Send us your target references and annual volumes, and our team will confirm availability and cross-reference support.

banner
News Details
Home > News >

Company news about-WEGO Adds DAF Urea Module OE 2115847 to Its SCR Range: Why the AdBlue Dosing Module Decides Euro 6 Uptime

WEGO Adds DAF Urea Module OE 2115847 to Its SCR Range: Why the AdBlue Dosing Module Decides Euro 6 Uptime

2026-11-19

New at WEGO: DAF Urea Module, OE Reference 2115847

Ruian Wego Auto Parts Co., Ltd (WEGO) has added the DAF urea module with OE reference 2115847 to its SCR (Selective Catalytic Reduction) product range. The part is a complete AdBlue dosing module for DAF heavy-duty trucks, and it joins a urea programme that already covers AdBlue injectors, DEF pumps, urea nozzles and dosing modules for Mercedes-Benz, MAN, Renault, Cummins, Ford, Fiat and Toyota applications.

For distributors and workshops, this is not simply one more SKU. The urea module is the single component that decides whether a Euro 6 truck actually converts its NOx, or whether it drops into a derate and stops earning. Below is a practical explanation of why it matters and what it does.

Why the Urea Module Is Critical on a Euro 6 Truck

Modern diesel emission control is a chain: NOx sensors measure, the engine ECU calculates, and the urea module delivers exactly the right quantity of AdBlue into the exhaust stream ahead of the SCR catalyst. Break any link and the whole system fails. The urea module is usually the weakest link, because it is the only part of the chain that handles a liquid that freezes, crystallises and contaminates.

  • Emission compliance — a module that under-doses raises tailpipe NOx immediately. In Europe, that means failing periodic inspection and losing the vehicle's compliance status.
  • No derate, no downtime — when dosing is interrupted or pressure cannot be built, the ECU logs a fault and progressively limits torque. A truck in limp mode is a truck losing revenue every hour.
  • SCR catalyst protection — over-dosing is just as damaging as under-dosing. Excess ammonia slips through the catalyst, and incorrect spray patterns cause urea deposits that block the mixer and poison the substrate.
  • Total cost of ownership — correct dosing keeps AdBlue consumption at the designed level. Poorly functioning modules quietly increase fluid consumption by 10-20% across a fleet.

What the Urea Module Actually Does

A complete urea dosing module such as OE 2115847 is a pump, a control unit and a sensor cluster in one housing. Its functions can be grouped as follows:

FunctionWhat It DoesFailure Symptom If It Degrades
Fluid supply and pressure regulationDraws AdBlue from the tank and maintains stable dosing pressureLow pressure faults, no dosing, torque derate
Dosing and injection controlMeters the exact quantity of urea per engine operating pointHigh NOx, ammonia slip, urea crystallisation
Heating and thawingWarms the module so frozen DEF (below -11 °C) returns to liquidCold-start faults, winter no-start of the SCR system
Level, temperature and quality sensingReports DEF level, temperature and concentration to the ECUFalse "poor quality" warnings, wrong dosing corrections
Reversing and purgingEmpties the line after engine stop to prevent freezing damageFrozen lines, cracked housings, repeat module failure
Diagnostics and CAN communicationStores fault codes and exchanges data with the engine ECUSpurious MIL, undiagnosable faults, misdiagnosis

What Buyers Should Check Before Ordering

  • Match the OE number exactly — 2115847 must appear on the original unit or in the vehicle's parts documentation; DAF urea modules are not interchangeable across all build years.
  • Confirm the connector and mounting pattern — the same functional module can differ in plug type and bracket between production periods.
  • Check the DEF system as a whole — replacing a module on a system with a contaminated tank or a blocked injector will produce an early repeat failure and a warranty claim.
  • Verify fitment by VIN — our team can cross-check the OE reference against your chassis range before shipment.

Built to the Same Standard as the Rest of the WEGO Range

WEGO has manufactured and exported SCR system parts since 2011, with 80-90% of output shipped internationally and an engineering team carrying around 20 years of SCR experience. The company's quality policy — "Pursue zero defects" — is applied through incoming component verification, in-process checks and final functional testing rather than a single end-of-line inspection. The DAF urea module OE 2115847 is supplied and tested under the same process.

Ordering the DAF Urea Module OE 2115847

Distributors, fleet workshops and private-label buyers can now request quotations for OE 2115847. The part can be consolidated with NOx sensors, PM sensors, DEF sensors, AdBlue injectors and VGT actuators in a single shipment to reduce freight cost per unit. Send us your target references and annual volumes, and our team will confirm availability and cross-reference support.